[Signature] How to handwrite or capture the signature of customers?

Posted by Administrator - 3/31/2016 6:07 PM
Admin
Member for: 2 years 4 months 28 days

This article applies to M2 2015 and oder versions.

 
1. To capture the signature of your customer in the diagram to approve the seam layout or estimates, go to Takeoff tab-> click small triangle icon below Note command
 
2. Write anything with the free hand option and it highlights the lines in Blue.
 
3. When you finish you have to right click off the image to make the lines black. 
 
4.  Click save. The signature will be saved with the project
 
Note: if you try another function while the lines are blue like draw the blue lined image will disappear. 

 

 

  • Member
    Member for: 2 years 3 months 18 days
    #1 by Brian 4/5/2016 3:04 PM

    I use this function for commercial takeoffs a lot for ticking off and highlighting information on PDF plans uploaded. Sometimes there is so much unessary written detail on a plan not relating to flooring that i strike through info not required and circle info that is. 

    A highlighter oprion would be better

     

Displaying 1 to 1 of 1 messages